P2 33W
Engraving Parameters
Material | Line Interval | Speed(mm/min) | Power(%) | NOTE |
---|---|---|---|---|
Basswood | 0.12mm | 20000 | 65 | |
Leather | 0.12mm | 20000 | 40 | |
Kraft paper | 0.12mm | 20000 | 35 | |
MDF | 0.12mm | 20000 | 35 | |
Stainless steel | 0.09mm | 3000 | 100 | It is recommended to choose a thicker stainless steel. |
Anodizedaluminum | 0.09mm | 15000 | 100 | |
Glass | 0.12mm | 20000 | 70 | Engraving is done after the material is blackened or color paper is applied to the surface. |
Ceramic | 0.12mm | 20000 | 70 | The engraving is done after the color paper is applied to the surface of the material. |
Acrylic | 0.12mm | 20000 | 40 |
Cutting Parameters
Material | Thickness | Power(%) | Speed(mm/min) | Pass | NOTE |
---|---|---|---|---|---|
Basswood | 4mm | 100 | 600 | 1 | |
Basswood | 6mm | 100 | 400 | 1 | |
Basswood | 8mm | 100 | 300 | 1 | |
Basswood | 10mm | 100 | 200 | 1 | Please lower the focal length by 2-3mm |
Basswood | 12mm | 100 | 100 | 1 | |
Cork Wood | 10mm | 100 | 250 | 1 | |
Leather | 1mm | 100 | 4500 | 1 | |
Kraft paper | 1mm | 100 | 4500 | 1 | |
MDF | 2mm | 100 | 800 | 1 | |
MDF | 3mm | 100 | 700 | 1 | |
Acrylic | 2mm | 100 | 500 | 1 | Must be black nontransparent acrylic to be cut. |
Acrylic | 4mm | 100 | 400 | 1 | Must be black nontransparent acrylic to be cut. |