P2 20W
Engraving Parameters
| Material | Line Interval | Speed（mm/min） | Power（%） | NOTE |
|---|---|---|---|---|
| Basswood | 0.11mm | 20000 | 80 | |
| Leather | 0.11mm | 20000 | 50 | |
| Kraft paper | 0.11mm | 20000 | 85 | |
| MDF | 0.11mm | 20000 | 70 | |
| Stainless steel | 0.09mm | 2000 | 100 | It is recommended to choose a thicker stainless steel. |
| Anodizedaluminum | 0.09mm | 10000 | 100 | |
| Glass | 0.11mm | 20000 | 100 | Engraving is done after the material is blackened or color paper is applied to the surface. |
| Ceramic | 0.11mm | 20000 | 100 | The engraving is done after the color paper is applied to the surface of the material. |
| Acrylic | 0.11mm | 20000 | 60 |
Cutting Parameters
| Material | Thickness | Power（%） | Speed（mm/min） | Pass | NOTE |
|---|---|---|---|---|---|
| Basswood | 4mm | 100 | 400 | 1 | |
| Basswood | 6mm | 100 | 300 | 1 | |
| Basswood | 8mm | 100 | 200 | 1 | |
| Basswood | 10mm | 100 | 150 | 1 | Please lower the focal length by 2-3mm |
| Cork Wood | 10mm | 100 | 100 | 1 | |
| Leather | 1mm | 100 | 3000 | 1 | |
| Kraft paper | 1mm | 100 | 3000 | 1 | |
| MDF | 2mm | 100 | 500 | 1 | |
| MDF | 3mm | 100 | 400 | 1 | |
| Acrylic | 2mm | 100 | 300 | 1 | Must be black nontransparent acrylic to be cut. |
| Acrylic | 4mm | 100 | 200 | 2 | Must be black nontransparent acrylic to be cut. |