P1 10W
Engraving Parameters
| Material | Power（%） | Speed（mm/min） | NOTE |
|---|---|---|---|
| leather | 100 | 4500 | The parameters will vary according to the material color. |
| Basswood | 55 | 4800 | |
| Leather | 15 | 6000 | |
| Ceramic | 50 | 6000 | The surface needs to be heat transfer paper applied.This parameter is obtained when the ceramic surface is attached with colored paper. |
| Kraft paper | 40 | 7000 | |
| Acrylic | 100 | 4000 | For transparent surface need to be painted black. |
| Stainless steel | 100 | 300 |
Cutting Parameters
| Material | Thickness | Power（%） | Speed（mm/min） | Pass | NOTE |
|---|---|---|---|---|---|
| Acrylic | 2mm | 100 | 150 | 1 | Non transparent black acrylic plate is recommended. |
| Acrylic | 4mm | 100 | 100 | 2 | Non transparent black acrylic plate is recommended. |
| Basswood | 2mm | 100 | 360 | 1 | |
| Basswood | 6mm | 100 | 150 | 1 | |
| Basswood | 7.5mm | 100 | 120 | 1 | |
| Kraft paper | 1mm | 100 | 1500 | 1 | |
| Leather | 1mm | 100 | 1500 | 1 |